Add Product

Search Results:

Reply
Visitor
Posts: 1
Registered: ‎07-01-2011

Re: Remote Control Codes for Home Audio

Hello.  

 

Trying to control:

Insignia NS-R5101

 

with remote from Cox Cable box:

Scientific Atlanta Explorer 8240 HDC

 

Thanks for the help!

Visitor
Posts: 1
Registered: ‎07-06-2011

Re: Remote Control Codes for Home Audio

UVerse Remote S10-S2 for NS-SBar...thnx Smiley Very Happy

 

And instructions on how to do this if you can. :/

Visitor
Posts: 1
Registered: ‎07-07-2011

Re: Remote Control Codes for Home Audio

I have an insignia ns-h4005 home theater system that includes DVD/VCR.

 

I cannot find remote codes for my UR5U-8780L-BHT, universal remote. The "CLIKR-5" is being used with a brighthouse provided, scientific atlantic cable box.

 

I browsed some older posts and tried codes that had been given to others and had no positive results.

 

Any help would be greatly appreciated.

Visitor
Posts: 2
Registered: ‎07-07-2011

Re: Remote Control Codes for Home Audio

I'm trying to find an universal remote control that will work my Insignia NS-R5101HD Audio Receiver.  Has anyone had any luck finding one? 

Posts: 9,177
Topics: 424
Kudos: 648
Solutions: 405
Registered: ‎09-29-2008

Re: Remote Control Codes for Home Audio

Hello billl55,

Welcome to Community@Insignia™!

When selecting a universal remote control, be sure that Insignia is included as a compatible brand. Even so, remember that full functionality may not be provided by all controllers -- many will provide only basic controls such as power and volume. Oftentimes, for full functionality, the factory remote or a higher end universal is required.

Regards,
John
Insignia™ Support

John|Social Media Specialist | Best Buy® Corporate
Give Kudos if you like this post or Accept as Solution if it answers your query!
Visitor
Posts: 1,505
Registered: ‎03-22-2011

Re: Remote Control Codes for Home Audio

Hello Mcgraw3932,

 

I apologize for the delay in my response, but could you provide me with the model number listed on the back of your Cox Cable remote? With this model number I should be able to find the proper remote code for you.

Visitor
Posts: 1,505
Registered: ‎03-22-2011

Re: Remote Control Codes for Home Audio

Hello 209Man,

 

There is not a specific code for ATT U-Verse remotes to control the NS-SBAR, however you can use the code search feature of the remote. Do do this please follow these steps:

 

  1. Turn on the NS-SBAR.
  2. While pointing the remote at the NS-SBAR, press and hold the "Aux" and "OK" buttons.
  3. Release both button and the mode buttons will flash to inform you that you are in programming mode.
  4. Press 9 9 2 and the Aux button will flash twice.
  5. Press "Play" then press 2, the Aux button will flash twice again.
  6. Press and hold "Play" until the NS-SBAR turns off.
  7. Press "Enter" to save the code.

If you do not find a code by following these steps it is possible that you need to press 4 instead of 2 on step 5. This is because ATT has separate classifications for Aux devices, 1 - VCR, 2 - Receiver/Tuner, 3 - Amplifier, 4 - Home Theater in a Box (HTIB), and as a result you might need to try both settings as the NS-SBAR could be classified under either Receiver/Tuner or HTIB.

Visitor
Posts: 2
Registered: ‎07-07-2011

Re: Remote Control Codes for Home Audio

Purchased several universal remotes some had over eight codes for insignia receivers none worked also tried the learning and it also failed.  Just would like to know which universal remote will actually work the receiver if there is even one. 

Visitor
Posts: 1,505
Registered: ‎03-22-2011

Re: Remote Control Codes for Home Audio

Hello Billyd1,

 

I would suggest trying the code 589, if that does not work please try using the code search feature by following these steps:

 

  1. Turn on the the NS-H4005.
  2. Press and hold the "Aux" and "OK" button for 3 seconds, the LED will light a solid red color.
  3. Press and hold the "CH+" button until the NS-H4005 turns off.
  4. Press the "Aux" button again to save the code.
Posts: 9,177
Topics: 424
Kudos: 648
Solutions: 405
Registered: ‎09-29-2008

Re: Remote Control Codes for Home Audio

Hello billl55,

Unfortunately we can't provide a specific recommendation for a universal remote control. Even though our codes may be included with a universal remote, there may still be compatibility issues that prevent the remote from controlling your receiver. If you provide the brand and model number for remotes you have tried, we can research based on that information. However, in my experience, I had the best success when I upgraded to a higher end universal remote to control all of my home theater devices.

Regards,
John
Insignia™ Support

 

John|Social Media Specialist | Best Buy® Corporate
Give Kudos if you like this post or Accept as Solution if it answers your query!